RE-2X(St)YSWBY, RE-2Y(St)YSWBY (PiMF,TiMF)

Instrumentation cable, screened, armoured, according to EN 50288–7

Cable structure

• Stranded bare copper core 0,5 mm² (7 x 0,31 mm), 0,75 mm² (7 x 0,37 mm),1 mm² (7 x 0,43 mm) ,1,3 mm² (7 x 0,49 mm), 1,5 mm² (7 x 0,52 mm)
• Core insulation cross-linked PE - 2X, polyethylene - 2Y
• White and black core with numering, pair: a-core black, b-core white. Color code of triple version: white, black, red
• Cores twisted into pairs, pairs stranded in layers
• PiMF, TiMF – pairs in Al-PET foil with tinned copper drain–wire ø0,6 mm, wrapping with plastic foil
• Overall screen with Al-PET foil with tinned drain wire 0,5 mm² (7x0,31 mm)
• Inner sheath PVC
• Armouring with galvanized steel wire braiding
• Sheath of special PVC compound according to DIN VDE 0207 part 5
• Self-extinguishing and flame retardant PVC according to IEC 60332-1-2, IEC 60332-3-24 (cat.C), color black or blue for hazardous areas, for intrinsically safe electric circuits
• Suitable for intrinsically safe systems zone 1+2 group II according too IEC 60079-14

Technical data

• Conductor resistance 0,5 mm² max. 39,2 Ω/km, 0,75 mm² max. 24,6 Ω/km, 1,0 mm² max. 18,4 Ω/km, 1,3 mm² max. 14,2 Ω/km, 1,5 mm² max. 12,3 Ω/km
• Temperature range flexing from -5°C to +50°C; fixed from -30°C to +70°C (for 2Y); -30°C to +90°C (for 2X)
• Nominal voltage max. 300 V
• Test voltage a.c. core/core 2000 V, core/screen 1000 V
• Insulation resistance min. 5 GΩ/km
• Inductance max. 0,70 mH/km
• Cross talk attenuation at 60kHz min. 0,88 dB/km, (1,02 dB/km for PIMF version)
• Minimum bending radius fixed approx. 10 x cable diameter
• Minimum bending radius flexing approx. 15 x cable diameter (1 kHz)

Application

Armoured data cables are used for data transfer up to 200 kbit/s in control and operating processes, where cables are exposed to high mechanical stress. Screened pairs are protected against electrostatic interferences. Low attenuations and low mutual capacitances enable long transimission distances and fast pulse acceleration. These data cables are ideal for fixed installation in dry or wet areas as well as for indoor or outdoor instalation.

Note:

• CE = the product is conformed with the EC Low-Voltage Directive 2014/35/EU.
• Version RE-2Y(St)YSWBY arctic from -50 °C available on request.
• Conforms to RoHS.

Technical characteristics

RE-2X(St)YSWBY PiMF, TiMF (RE-2Y(St)YSWBY PiMF, TiMF)