JE-LiYCY Bd Si

Cable for industrial electronics, suitable for fast connections

Cable structure

• Bare copper core 0,5mm² (7 x 0,3 mm)
• Core insulation of special PVC compound
• Color coded cores according to DIN VDE 0815
• Cores twisted to pairs with optimal lay-lenght, 4 pairs stranded to bunch, bunches stranded in layers
• Plastic foil wrapping
• Tinned copper braided screening, approx. 85% coverage
• Sheath of special PVC compound
• Color blue or grey for hazardous areas with the possibility of explosion or fire -i- (=intrinsically safe)
• PVC self-extinguishing and flame resistant, according to DIN VDE 0482-332-1-2/DIN EN 60332-1-2/IEC 60332-1-2

Technical data

• Special core insulation according to DIN VDE 0815
• Conductor resistance max 78,4 Ω/km
• Temperature range flexing from -5°C to +50°C; fixed from -30°C to +70°C
• Nominal voltage 225 V
• Test voltage a.c. 50 Hz core/core 500 V, core/screen 2000V
• Insulation resistance min. 100 MΩ x km
• Mutual capacitance max. 100 pF/m (this value can be exceeded by 20 % in cables up to 4 pairs)
• Capacitance unbalance max. 200 pF/100 m
• Inductance approx. 0,65 mH/km
• Radiation resistance up to 80 x 10⁶ cJ/kg (up to 80 Mrad)
• Minimum bending radius approx. 7,5 x cable diameter
• Ideal for fast connection

Application

These connecting cables are used for for transmission of data and impulses in measuring and regulation technics, in electrical control circuits and for data transmission in computers. These cables are suitable for installation in moist areas as well as for outer use. Version with blue outer sheath for installation in hazardous areas with possible threats of explosion and fire -i- (= intrisically safe). These cables offer all advatages of fast and economic installation. This solderless conecting technique is based on a compression termination that uses a spring-clip for the connection of the cable to a square rigid post withot pre-stripping. For this technique it is necessary to have an exact 7-core stranded PVC conductor and a semi-rigid PVC.

Note:

• CE = the product is conformed with the EC Low-Voltage Directive 2014/35/EU.
• Halogen-free version also available.
• Conforms to RoHS.

Technical characteristics