JE-Y(St)Y Bd Si

Installation cable for industrial electronics

Cable structure

• Solid plain copper conductor, diameter 0,8 mm
• Core insulation of special PVC compound
• Color coded cores according to DIN VDE 0815
• Cores twisted to pairs with optimal lay-lenght, 4 pairs stranded to bunch, bunches stranded in layers
• Plastic foil wrapping
• PVC coated aluminium foil screen
• Copper drain wire
• Sheath of special PVC compound
• Color blue or grey for hazardous areas with the possibility of explosion or fire -i- (= intrinsically safe)
• PVC self-extinguishing and flame resistant, according to DIN VDE 0482-332-1-2/DIN EN 60332-1-2/IEC 60332-1-2

Technical data

• Special core insulation according to DIN VDE 0815/DIN 57815
• Conductor resistance max 73,2 Ω/km
• Temperature range flexing from -5°C to +50°C; fixed from -30°C to +70°C
• Nominal voltage 225 V
• Test voltage a.c. 50 Hz core/core 500 V, core/screen 2000V
• Insulation resistance min. 100 MΩ x km
• Mutual capacitance max. 100 pF/m (this value can be exceeded by 20 % in cables up to 4 pairs)
• Capacitance unbalance max. 200 pF/100 m
• Inductance approx. 0,65 mH/km
• Radiation resistance up to 80 x 10⁶ cJ/kg (up to 80 Mrad)
• Minimum bending radius approx. 7,5 x cable diameter

Application

This type of cable is especialy suitable for signal transmission and measuring in the area of electronics for data transmission in computers. The cable is also suitable for fixed installation in dry and wet environments as well as for outer use (with UV protection). Version with blue outer sheath for intrinsic safe installation.

Note:

• CE = the product is conformed with the EC Low-Voltage Directive 2014/35/EU.
• Halogen-free version also available, see section "Halogen-free cables" part 5.
• Conforms to RoHS.

Technical characteristics