J-H(St)H Bd

Installation cable, halogen-free

Cable structure

• Stranded bare copper conductor for cross-sections 0,6 mm, 0,8 mm
• Halogen-free core insulation according to DIN VDE 0207 part 23
• Core color coded according to DIN VDE 0815
• The cores stranded to quads, 5 quads stranded to unit and wrapped with plastic tape
• Electrostatic screening (St) with plastic coated aluminium foil (Al PET) + CuSn drain wire
• Separator
• Grey, halogen-free sheath of polymer compound
• Red, halogen-free sheath of polymer compound for fire alarms

Technical data

• Flame retardant, halogen-free, installation cable according to DIN VDE 0815
• Temperature range flexing from -5°C to +50°C; fixed from -30°C to +70°C
• Loop resistance at 20°C max. 130 Ω/km (0,6 mm), max. 73,5 Ω/km (0,8 mm)
• Operating voltage (peak value) 300 V
• Test voltage a.c.core/core 800 V, core/screen 800 V
• Insulation resistance min. 100 MΩ x km
• Mutual capacitance at 800 Hz max. 120 nF/km (this value can be exceeded by 20 % in cables up to 4 pairs)
• Capacitance unbalance at 800 Hz K1 max. 300pF/100 m, K9-12 max. 100pF/100 m
• Attenuation at 800 Hz 1,72 dB/km (0,6 mm), 1,12 dB/km (0,8 mm)
• Minimum bending radius approx. 7,5 x cable diameter

Tests

• Flame-retardant to DIN VDE 0482 part 266-2/HD 405.3/BS 4066 PT3/EN 50266-2/IEC 60332-3
• Low corrosiveness of combustion gases to DIN VDE 0482 part 267/BS 6425 PT2/EN 50267-2-2/IEC 60754-2
• Smoke density to DIN VDE 0482 part 268/HD 606/BS 7622 PT1,PT2/EN 50268-1,-2/IEC 61034-1,-2

Application

Halogen-free installation cables with improved characteristics in case of fire are used for telephone transmission, measurement and control technology. The electrostatic screening considerably reduces effect of outer electrical interferences. In case of fire no flame propagation. When burning no corrosive gases are produced. These cables are preferably used for telecommunication indoor installations and in special cases, outer application is permitted under protection against UV radiation. These cables are also suitable for fixed installation in dry and moist areas as well as under plaster. As cables for fire alarms with red colored outer jacket and imprint "BRANDMELDEKABEL"

Note:

• CE = the product is conformed with the EC Low-Voltage Directive 73/23/EEC.
• BRANDMELDEKABEL - red sheath for fire alarms available upon request.
• Conforms to RoHS.

Technical characteristics