JE-H(St)H FE180/E30-E90 Bd

Installation cable, fire-resistant, halogen-free, orange (red) sheath

JE-H(St)H FE180/E30-E90

Cable structure

  • Cu plain conductor of diameter 0,8 mm
  • Core insulation of halogen-free elastomer compound
  • Core identification with color rings and ring-groups to DIN VDE 0815
  • Cores twisted to pairs, 4 pairs consist to unit, units twisted in layers and units identified by numbered tape.
  • Twisted units wrapped with special glass-fibre tape
  • Electrostatic screening (St) with plastic coated aluminium foil (Al PET) + CuSn drain wire ø 0,8 mm
  • Halogen-free sheath of polymer compound, flame retardant
  • Color sheath orange or red with imprint BRANDMELDEKABEL for fire alarms

Technical data

  • Halogen-free, flame retardant installation cable according to DIN VDE 0815
  • Insulation integrity under the impact of flames 180 min according to IEC 60331, DIN VDE 0472 part 814
  • Function integrity according to DIN VDE 4102 part 12 E30 to E90 depending on installation technique
  • Loop resistance max. 73,2 Ω/km
  • Temperature range flexing from -5°C to +50°C; fixed from -30°C to +70°C
  • Operating voltage (peak value) 225 V
  • Test voltage a.c.core/core 500 V; core/screen 2000 V
  • Insulation resistance min. 100 MΩ x km
  • Mutual capacitance at 800 Hz max. 120 nF/km (this value can be exceeded by 20 % in cables up to 4 pairs)
  • Capacitance unbalance 200pF/100 m, (20% of the values, but one value up to 400 pF is allowed)
  • Minimum bending radius approx. 7,5 x cable diameter
  • Radiation resistance up to 100 x 106 cJ/kg (up to 100 Mrad)

Tests

  • Flame-retardant to DIN VDE 0482 part 266-2/HD 405.3/BS 4066 PT3/EN 50266-2/IEC 60332-3
  • Low corrosiveness of combustion gases to DIN VDE 0482 part 267/BS 6425 PT2/EN 50267-2-2/IEC 60754-2
  • Halogen-free to DIN VDE 0482 part 267/BS 6425 PT1/EN 50267-2-1/IEC 60754-1
  • Smoke density to DIN VDE 0482 part 268/HD 606/BS 7622 PT1,PT2/EN 50268-1,-2/IEC 61034-1,-2
  • Insulation integrity under direct flame propagation according to DIN VDE 0472 part 814, IEC 60331
  • Function integrity according to DIN VDE 4102 part 12 of electrical cable system for a period of 30 to 90 min

Application

Halogen-free, flame resistant installation cables are mostly used for telecommunication. The electrostatic screening considerably reduces effect of outer electrical interferences. In case of fire no flame propagation and low smoke density. These flame-resistant cables are used for fixed installation in all locations where a special protection against fire and fire damage to human life and equipment is necessary such as in industry complexes, power stations, public buildings, hotels, airports, subways, theatres, hospitals etc.

FE180: Insulation integrity for 180 min. Test according to IEC 60331 and DIN VDE 0472 part 814 Insulation integrity under direct impact of flames for a period of 180 minutes
E30: Function integrity according to DIN VDE 4102 part 12 of electrical cable system for a period of min. 30 minutes. The function integrity for 30 minutes assures the functional performance of the fire warning and alarm systems, safety and spare lighting, passenger and evacuation lifts in order to avacuate persons and animals from a burning building.
E90: Function integrity according to DIN VDE 4102 part 12 of electrical cable system for a period of min. 90 minutes assures the functional performance of water-pressure rising systems to avoid smoke and heat in safety stairs, machine rooms, emergency lifts, extract systems etc.

Note:

  • E30 to E90 functionality to DIN VDE 4102 part 12, depending on installation technique.
  • BRANDMELDEKABEL - with red sheath for fire alarms.
  • CE = the product is conformed with the EC Low-Voltage Directive 73/23/EEC.
  • Conforms to RoHS.

Technical characteristics

Functionality E30-E90

Ord. code - sheath orange Ord. code - sheath red Number of cores × ø core [mm] - (cross-section [mm2]) Approx. outer ø [mm] Copper weight [kg/km] Approx. cable weight [kg/km]
0534081 0534091 2 × 2 × 0,8 (0,5) 7,4 25 74
0534082 0554092 4 × 2 × 0,8 (0,5) 10,8 45 127
0534083 0534093 8 × 2 × 0,8 (0,5) 16,9 85 300
0534084 0534094 12 × 2 × 0,8 (0,5) 18,5 126 336
0534085 0534095 16 × 2 × 0,8 (0,5) 20,1 166 426
0534086 0534096 20 × 2 × 0,8 (0,5) 22,2 206 529
0534087 0534097 32 × 2 × 0,8 (0,5) 29,1 326 859
0534088 0534098 40 × 2 × 0,8 (0,5) 34,2 407 1094
0534089 0534099 52 × 2 × 0,8 (0,5) 37,3 529 1280

Functionality E30-E90

Ord. code - sheath orange Ord. code - sheath red Number of cores × ø core [mm] - (cross-section [mm2]) Approx. outer ø [mm] Copper weight [kg/km] Approx. cable weight [kg/km]
0534148 0534157 2 × 2 × 0,8 (0,5) 12,0 25 74
0534149 0534158 4 × 2 × 0,8 (0,5) 14,0 45 127
0534150 0534159 8 × 2 × 0,8 (0,5) 20,1 85 300
0534151 0534160 12 × 2 × 0,8 (0,5) 21,2 126 336
0534152 0534161 16 × 2 × 0,8 (0,5) 21,9 166 426
0534153 0534162 20 × 2 × 0,8 (0,5) 24,2 206 529
0534154 0534163 32 × 2 × 0,8 (0,5) 27,1 326 859
0534155 0534164 40 × 2 × 0,8 (0,5) 30,0 407 1094
0534156 0534165 52 × 2 × 0,8 (0,5) 35,0 529 1280

Products

Metal prices (€/100kg)

22.06.2018

Al = 232.11€/100kg
Cu = 602.62€/100kg

21.06.2018

Al = 232.58€/100kg
Cu = 602.68€/100kg

20.06.2018

Al = 233.13€/100kg
Cu = 604.22€/100kg

19.06.2018

Al = 235.38€/100kg
Cu = 615.21€/100kg

18.06.2018

Al = 237.49€/100kg
Cu = 629.47€/100kg

Top news

New company name

Dear business partners, I would like to inform you about change of legal status of our company DDA spol. s r.o. into DDA a.s. registered in Business regist...

New products added!

New products added to our portfolio: SERVO-FLEX-PUR-JZ - highly flexible cable for drag chains SERVO-FLEX-PVC-JZ - flexible power supply cable for s...

New website launched

DDA Ltd. has launched its new website.

ISO 9001:2000 certificate

DDA Ltd. is a holder of ISO 9001:2000 certificate.

Česky English
Developed by: FRONK Design
All rights reserved DDA © 2006